[gull] linux sur plateforme AMD64
Christophe DONZELOT
hb9tln at hb9ww.ampr.org
Thu Jul 12 21:39:45 CEST 2007
J'ai installé depuis quelques temps un serveur basé sur une barebone
TYAN TA-26 (carte mère S3992 chipset HT-1000 2xcpu Opteron 2210 (double
coeur) 2 x 4 Go DDR-II ) .
Après avoir essayé plusieurs distributions 32 et 64 bits (etch, ubuntu
LTS,Opensuse,actuellement CentOS 5) le problème est toujours le même :
au boot la mémoire occupée est < 100 Mo ce qui est normal
donzelot at gandalf:~$ free
total used free shared buffers cached
Mem: 8131552 656356 7475196 0 27748 276980
-/+ buffers/cache: 351628 7779924
Swap: 8388600 0 8388600
ensuite la mémoire est grignotée par les accès au filesystem , un simple
"du -sh" suffit.
[root at gandalf /]# du -sh
34G .
[root at gandalf /]# free
total used free shared buffers cached
Mem: 8131552 3298964 4832588 0 983788 277176
-/+ buffers/cache: 2038000 6093552
Swap: 8388600 0 8388600
[root at gandalf /]#
J'ai déplacé les disques SATA sur un controleur raid pci express
(highpoint 2320) en croyant que le problème se situait au niveau sur
driver sata HT-1000 mais le problème reste entier .
Le support highmem est activé pour prendre en charge les 8 Go de RAM
Quelqu'un a t'il déjà utilisé un config similaire avec le même genre de
problèmes ?
J'ai aussi essayé un kernel 2.6.20 Ubuntu sans succès
Le problème est reproductible avec raid soft ou lvm .
Actuellement j'utilises une config lvm .
[root at gandalf donzelot]# df
Sys. de fich. 1K-blocs Occupé Disponible Capacité Monté sur
/dev/mapper/system-root
20314748 2692856 16573316 14% /
/dev/sda1 69972 20978 45381 32% /boot
tmpfs 4066416 0 4066416 0% /dev/shm
/dev/mapper/vg-home 103212320 32221196 65748244 33% /home
/dev/mapper/vg-opt 103212320 828404 97141036 1% /opt
[root at gandalf donzelot]# uname -an
Linux gandalf.letelab.net 2.6.18-8.1.8.el5xen #1 SMP Tue Jul 10 07:06:45
EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
Les perf sont bonnes pour un raid5 à 3 disques .
[root at gandalf donzelot]# /sbin/hdparm -tT /dev/sdb
/dev/sdb:
Timing cached reads: 3864 MB in 2.00 seconds = 1934.18 MB/sec
Timing buffered disk reads: 454 MB in 3.01 seconds = 150.92 MB/sec
donzelot at gandalf:~$ free
total used free shared buffers cached
Mem: 8131552 4299016 3832536 0 1042968 1060764
-/+ buffers/cache: 2195284 5936268
Swap: 8388600 0 8388600
donzelot at gandalf:~$ dmesg
Bootdata ok (command line is ro root=/dev/system/root rhgb quiet)
Linux version 2.6.18-8.1.8.el5xen (mockbuild at builder6.centos.org) (gcc
version 4 .1.1
20070105 (Red Hat 4.1.1-52)) #1 SMP Tue Jul 10 07:06:45 EDT 2007
BIOS-provided physical RAM map:
Xen: 0000000000000000 - 00000001f0e38000 (usable)
On node 0 totalpages: 2035256
DMA zone: 2035256 pages, LIFO batch:31
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @
0x00000000000f8b90
ACPI: XSDT (v001 A M I OEMXSDT 0x05000729 MSFT 0x00000097) @
0x00000000ceff010 0
ACPI: FADT (v003 A M I OEMFACP 0x05000729 MSFT 0x00000097) @
0x00000000ceff029 0
ACPI: MADT (v001 A M I OEMAPIC 0x05000729 MSFT 0x00000097) @
0x00000000ceff039 0
ACPI: OEMB (v001 A M I AMI_OEM 0x05000729 MSFT 0x00000097) @
0x00000000ceffe04 0
ACPI: SRAT (v001 AMD HAMMER 0x00000001 AMD 0x00000001) @
0x00000000ceff3f6 0
ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @
0x00000000ceff407 0
ACPI: DSDT (v001 0AAAA 0AAAA000 0x00000000 INTL 0x02002026) @
0x000000000000000 0
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-15
ACPI: IOAPIC (id[0x05] address[0xfec01000] gsi_base[16])
IOAPIC[1]: apic_id 5, version 17, address 0xfec01000, GSI 16-31
ACPI: IOAPIC (id[0x06] address[0xfec02000] gsi_base[32])
IOAPIC[2]: apic_id 6, version 17, address 0xfec02000, GSI 32-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at d0000000 (gap: cf000000:2fc00000)
Built 1 zonelists. Total pages: 2035256
Kernel command line: ro root=/dev/system/root rhgb quiet
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Xen reported: 1795.500 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Kernel range: 0xffff88000a8be000 - 0xffff88000e8be000
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Memory: 7898484k/8141024k available (2321k kernel code, 233636k
reserved, 1312k
data, 168k init)
Calibrating delay using timer specific routine.. 4490.68 BogoMIPS
(lpj=8981367)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
(SMP-)alternatives turned off
ACPI: Core revision 20060707
Initializing CPU#1
Initializing CPU#2
Brought up 4 CPUs
sizeof(vma)=168 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=240 bytes
Initializing CPU#3
migration_cost=403
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.1
PCI: Firmware left 0000:00:04.0 e100 interrupts enabled, disabling
Boot video device is 0000:00:0c.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1.P1P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1E._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR28._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR32._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR3C._PRT]
ACPI: PCI Interrupt Link [LN00] (IRQs 3 4 5 7 *9 11 12 14 15)
ACPI: PCI Interrupt Link [LN01] (IRQs 1 3 4 5 6 7 9 *11 12 14 15)
ACPI: PCI Interrupt Link [LN02] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN03] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN04] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN05] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN06] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN07] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN08] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN09] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN10] (IRQs 1 3 4 5 6 *7 9 11 12 14 15)
ACPI: PCI Interrupt Link [LN11] (IRQs 1 3 4 *5 6 7 9 11 12 14 15)
ACPI: PCI Interrupt Link [LN12] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN13] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN14] (IRQs 1 3 4 5 6 7 *9 11 12 14 15)
ACPI: PCI Interrupt Link [LN15] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN16] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN17] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN18] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN19] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN20] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN21] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN22] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN23] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN24] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN25] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN26] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN27] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN28] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN29] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LN30] (IRQs 1 3 4 5 6 7 9 11 12 14 15) *0,
disabled.
ACPI: PCI Interrupt Link [LNUS] (IRQs *10)
ACPI: PCI Interrupt Link [LNSA] (IRQs *11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a
report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:09: ioport range 0x580-0x58f has been reserved
pnp: 00:09: ioport range 0x590-0x593 has been reserved
pnp: 00:09: ioport range 0x700-0x703 has been reserved
pnp: 00:09: ioport range 0xca0-0xcaf has been reserved
pnp: 00:0b: ioport range 0x600-0x61f has been reserved
pnp: 00:0b: ioport range 0x520-0x53f has been reserved
pnp: 00:0b: ioport range 0x540-0x54f could not be reserved
pnp: 00:0b: ioport range 0x640-0x65f has been reserved
PCI: Bridge: 0000:01:0d.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:01.0
IO window: 9000-afff
MEM window: ff000000-ff0fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:07.0
IO window: disabled.
MEM window: ff100000-ff1fffff
PREFETCH window: cfd00000-cfdfffff
PCI: Bridge: 0000:00:08.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:09.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:07:00.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:07:00.2
IO window: b000-bfff
MEM window: ff200000-ff5fffff
PREFETCH window: cfe00000-cfefffff
PCI: Bridge: 0000:00:0a.0
IO window: b000-bfff
MEM window: ff200000-ff5fffff
PREFETCH window: cfe00000-cfefffff
PCI: Bridge: 0000:00:0b.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:08.0 to 64
PCI: Setting latency timer of device 0000:00:09.0 to 64
PCI: Setting latency timer of device 0000:00:0a.0 to 64
PCI: Setting latency timer of device 0000:07:00.0 to 64
PCI: Setting latency timer of device 0000:07:00.2 to 64
PCI: Setting latency timer of device 0000:00:0b.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
IA-32 Microcode Update Driver: v1.14-xen <tigran at veritas.com>
audit: initializing netlink socket (disabled)
audit(1184251543.780:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key B91DCCA02A005251
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Setting latency timer of device 0000:00:08.0 to 64
pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
PCI: Setting latency timer of device 0000:00:09.0 to 64
pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
PCI: Setting latency timer of device 0000:00:0a.0 to 64
pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
PCI: Setting latency timer of device 0000:00:0b.0 to 64
pcie_portdrv_probe->Dev[0132:1166] has invalid IRQ. Check vendor BIOS
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is
not pres ent [20060707]
ACPI: Getting cpuindex for acpiid 0x5
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is
not pres ent [20060707]
ACPI: Getting cpuindex for acpiid 0x6
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is
not pres ent [20060707]
ACPI: Getting cpuindex for acpiid 0x7
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is
not pres ent [20060707]
ACPI: Getting cpuindex for acpiid 0x8
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Xen virtual console successfully installed as ttyS0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks HT1000: IDE controller at PCI slot 0000:00:02.1
SvrWks HT1000: chipset revision 0
SvrWks HT1000: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:DMA
Probing IDE interface ide0...
hdb: DV-28E-R, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Write protecting the kernel read-only data: 439k
input: AT Translated Set 2 keyboard as /class/input/input0
SCSI subsystem initialized
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 10, io mem 0xff6ec000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.1[A] -> GSI 10 (level, low) -> IRQ 10
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 10, io mem 0xff6ed000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.2[A] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:03.2: EHCI Host Controller
ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:03.2: irq 10, io mem 0xff6ee000
ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
rr232x: module license 'Proprietary' taints kernel.
rr232x:2: RocketRAID 232x controller driver v1.05 (Apr 17 2007 07:32:46)
GSI 16 sharing vector 0xA0 and IRQ 16
ACPI: PCI Interrupt 0000:08:04.0[A] -> GSI 30 (level, low) -> IRQ 16
rr232x:2: adapter at PCI 8:4:0, IRQ 16
ohci_hcd 0000:00:03.0: wakeup
usb 1-2: new low speed USB device using ohci_hcd and address 3
rr232x:2: start channel [0,0]
rr232x:2: start channel [0,1]
rr232x:2: start channel [0,4]
rr232x:2: start channel [0,5]
rr232x:2: start channel [0,6]
usb 1-2: configuration #1 chosen from 1 choice
input: HID 413c:3010 as /class/input/input1
input: USB HID v1.10 Mouse [HID 413c:3010] on usb-0000:00:03.0-2
rr232x:2: channel [0,0] started successfully
rr232x:2: channel [0,1] started successfully
rr232x:2: channel [0,4] started successfully
rr232x:2: channel [0,5] started successfully
rr232x:2: channel [0,6] started successfully
scsi0 : rr232x
Vendor: HPT Model: DISK_0_0 Rev: 4.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sda: 292814848 512-byte hdwr sectors (149921 MB)
sda: Write Protect is off
sda: Mode Sense: 2f 00 00 00
SCSI device sda: drive cache: write through
SCSI device sda: 292814848 512-byte hdwr sectors (149921 MB)
sda: Write Protect is off
sda: Mode Sense: 2f 00 00 00
SCSI device sda: drive cache: write through
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
Vendor: HPT Model: DISK_0_1 Rev: 4.00
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 2929983488 512-byte hdwr sectors (1500152 MB)
sdb: Write Protect is off
sdb: Mode Sense: 2f 00 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 2929983488 512-byte hdwr sectors (1500152 MB)
sdb: Write Protect is off
sdb: Mode Sense: 2f 00 00 00
SCSI device sdb: drive cache: write back
sdb: unknown partition table
sd 0:0:1:0: Attached scsi disk sdb
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
libata version 2.00 loaded.
sata_svw 0000:01:0e.0: version 2.0
ACPI: PCI Interrupt 0000:01:0e.0[A] -> GSI 11 (level, low) -> IRQ 11
ata1: SATA max UDMA/133 cmd 0xFFFFC20000024000 ctl 0xFFFFC20000024020
bmdma 0xFF
FFC20000024030 irq 11
ata2: SATA max UDMA/133 cmd 0xFFFFC20000024100 ctl 0xFFFFC20000024120
bmdma 0xFF
FFC20000024130 irq 11
ata3: SATA max UDMA/133 cmd 0xFFFFC20000024200 ctl 0xFFFFC20000024220
bmdma 0xFF
FFC20000024230 irq 11
ata4: SATA max UDMA/133 cmd 0xFFFFC20000024300 ctl 0xFFFFC20000024320
bmdma 0xFF
FFC20000024330 irq 11
scsi1 : sata_svw
ata1: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xFFFFC2000002401C
scsi2 : sata_svw
ata2: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xFFFFC2000002411C
scsi3 : sata_svw
ata3: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xFFFFC2000002421C
scsi4 : sata_svw
ata4: SATA link down (SStatus 4 SControl 300)
ATA: abnormal status 0x7F on port 0xFFFFC2000002431C
ACPI: PCI Interrupt 0000:01:0e.1[A] -> GSI 11 (level, low) -> IRQ 11
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised:
dm-devel at redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
audit(1184251560.909:2): selinux=0 auid=4294967295
hdb: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
tg3.c:v3.65-rh (November 20, 2006)
GSI 17 sharing vector 0xA8 and IRQ 17
ACPI: PCI Interrupt 0000:04:04.0[A] -> GSI 26 (level, low) -> IRQ 17
8250_pnp: Unknown symbol serial8250_unregister_port
8250_pnp: Unknown symbol serial8250_register_port
EDAC MC: Ver: 2.0.1 Jul 10 2007
eth0: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit)
10/100/1 000BaseT
Ethernet 00:e0:81:47:b5:fe
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth0: dma_rwctrl[76144000] dma_mask[40-bit]
GSI 18 sharing vector 0xB0 and IRQ 18
ACPI: PCI Interrupt 0000:04:04.1[B] -> GSI 27 (level, low) -> IRQ 18
eth1: Tigon3 [partno(BCM95780) rev 8003 PHY(5780)] (PCIX:133MHz:64-bit)
10/100/1 000BaseT
Ethernet 00:e0:81:47:b5:ff
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1]
TSOcap[1]
eth1: dma_rwctrl[76144000] dma_mask[40-bit]
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
GSI 19 sharing vector 0xB8 and IRQ 19
ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 19
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
input: PC Speaker as /class/input/input2
e100: eth2: e100_probe: addr 0xff6eb000, irq 19, MAC addr 00:E0:81:47:3D:D9
EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
8250_pnp: Unknown symbol serial8250_unregister_port
8250_pnp: Unknown symbol serial8250_register_port
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
FDC 0 is a National Semiconductor PC87306
lp: driver loaded but no devices found
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (FF) [SLPF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 8388600k swap on /dev/system/swap. Priority:-1 extents:1
across:8388600k
process `sysctl' is using deprecated sysctl (syscall)
net.ipv6.neigh.lo.retrans_
time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
ADDRCONF(NETDEV_UP): eth2: link is not ready
e100: eth2: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready
audit(1184244384.612:3): audit_pid=2172 old=0 by auid=4294967295
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
eth2: no IPv6 routers present
Bridge firewalling registered
device vif0.2 entered promiscuous mode
xenbr2: port 1(vif0.2) entering learning state
xenbr2: topology change detected, propagating
xenbr2: port 1(vif0.2) entering forwarding state
ADDRCONF(NETDEV_UP): peth2: link is not ready
e100: peth2: e100_watchdog: link up, 100Mbps, full-duplex
ADDRCONF(NETDEV_CHANGE): peth2: link becomes ready
device peth2 entered promiscuous mode
xenbr2: port 2(peth2) entering learning state
xenbr2: topology change detected, propagating
xenbr2: port 2(peth2) entering forwarding state
eth2: no IPv6 routers present
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
/dev/vmmon[6115]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6115]: Module vmmon: initialized
/dev/vmmon[6124]: Module vmmon: unloaded
/dev/vmmon[6526]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[6526]: Module vmmon: initialized
/dev/vmnet: open called by PID 6571 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth2: enabling the bridge
bridge-eth2: up
bridge-eth2: already up
bridge-eth2: attached
/dev/vmnet: open called by PID 6579 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 6585 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 6598 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
vmnet8: no IPv6 routers present
/dev/vmmon[7044]: Module vmmon: unloaded
bridge-eth2: down
bridge-eth2: detached
More information about the gull
mailing list