[gull] [Q] module evbug
sneaky56 at gmx.net
sneaky56 at gmx.net
Wed Jan 7 23:29:01 CET 2004
Bonjour tout le monde et bonne année,
J'ai une petite question concernant le module evbug. J'ai remarqué que
mes logs se remplissaient très vite avec des messages semblables (en
fait, à chaque frappe de touche ou déplacement de souris, sous X):
Jan 7 22:46:00 varga kernel: evbug.c: Event. Dev: isa0060/serio0/input0, Type:
0, Code: 0, Value: 0
Jan 7 22:46:00 varga kernel: evbug.c: Event. Dev: isa0060/serio0/input0, Type:
1, Code: 42, Value: 1
Après qques recherches, j'ai trouvé qu'en enlevant le module evbug,
les messages n'apparaissaient plus dans les log. Cependant, je n'ai
toujours pas trouver, comment ne pas charger le module evbug au
démarrage, en effet, je ne sais pas qui/quoi le charge? Mes soupçons
se portent sur "hotplug", mais je ne suis pas sur.
Si quelqu'un a une idée sur comment procéder, je suis preneur.
Script started on Wed Jan 7 23:24:47 2004
thp at varga:~$ uname -a
Linux varga 2.6.0-test9-1-386 #1 Sun Oct 26 22:32:52 EST 2003 i686 GNU/Linux
thp at varga:~$ lsmod
Module Size Used by
md5 3968 1
ipv6 234688 18
scanner 22148 0
usb_storage 59840 0
snd_seq_oss 30464 0
snd_seq_midi_event 7680 1 snd_seq_oss
snd_seq 49808 4 snd_seq_oss,snd_seq_midi_event
snd_pcm_oss 48548 0
snd_mixer_oss 16512 1 snd_pcm_oss
uhci_hcd 30224 0
ohci_hcd 17536 0
ehci_hcd 22532 0
usbcore 101980 7 scanner,usb_storage,uhci_hcd,ohci_hcd,ehci_hcd
st 35736 0
sr_mod 15396 0
sg 34840 0
advansys 75936 0
scsi_mod 110136 5 usb_storage,st,sr_mod,sg,advansys
snd_via82xx 22880 0
snd_pcm 91044 2 snd_pcm_oss,snd_via82xx
snd_timer 23940 2 snd_seq,snd_pcm
tsdev 6784 0
snd_ac97_codec 47620 1 snd_via82xx
snd_page_alloc 11396 2 snd_via82xx,snd_pcm
snd_mpu401_uart 7296 1 snd_via82xx
snd_rawmidi 23584 1 snd_mpu401_uart
snd_seq_device 7816 3 snd_seq_oss,snd_seq,snd_rawmidi
snd 47716 12 snd_seq_oss,snd_seq_midi_event,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_via82xx,snd_pcm,snd_timer,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 9152 1 snd
radeon 109740 0
evdev 8832 0
via_rhine 20360 0
mii 4992 1 via_rhine
crc32 4608 1 via_rhine
floppy 58068 0
ide_cd 38020 0
cdrom 32416 2 sr_mod,ide_cd
mousedev 9172 0
psmouse 16140 0
af_packet 20744 2
via82cxxx 13596 1 [unsafe]
trm290 4996 0
triflex 5508 0
slc90e66 8200 0
sis5513 15496 0
siimage 13028 0
serverworks 12308 0
sc1200 8584 0
rz1000 3200 0
piix 11936 0
pdc202xx_old 15388 0
opti621 4740 0
ns87415 5064 0
hpt366 19396 0
hpt34x 5504 0
generic 4096 0
cy82c693 4996 0
cs5530 6792 0
cs5520 6280 0
cmd64x 11676 0
amd74xx 12312 0
alim15x3 11404 0
aec62xx 9756 0
pdc202xx_new 11548 0
font 8576 0
cfbcopyarea 4096 0
cfbimgblt 3456 0
cfbfillrect 3968 0
ext3 107688 3
jbd 56728 1 ext3
ide_disk 16384 8
ide_probe_mod 16384 1 cs5520,[unsafe]
ide_mod 137260 28 usb_storage,ide_cd,via82cxxx,trm290,triflex,slc90e66,sis5513,siimage,serverworks,sc1200,rz1000,piix,pdc202xx_old,opti621,ns87415,hpt366,hpt34x,generic,cy82c693,cs5530,cs5520,cmd64x,amd74xx,alim15x3,aec62xx,pdc202xx_new,ide_disk,ide_probe_mod
unix 26928 172
thp at varga:~$ cat /etc/modules
# /etc/modules: kernel modules to load at boot time.
#
# This file should contain the names of kernel modules that are
# to be loaded at boot time, one per line. Comments begin with
# a "#", and everything on the line after them are ignored.
af_packet
# mouse
mouse-0
# IDE CDROM
ide-cd
# floppy
floppy
# network:
network-card-0
# video
video-card-0
# sound
snd-card-0
# scsi
scsi-card-0
# firewire:
#firewire-card-0
thp at varga:~$ cat /etc/modprobe.d/local.varga
alias firewire-card-0 ieee1394
install ieee1394 /sbin/modprobe --ignore-install ieee1394 && { \
/sbin/modprobe ohci1394; \
/sbin/modprobe video1394; \
/sbin/modprobe raw1394; \
/bin/true; \
}
alias mouse-0 psmouse
install psmouse /sbin/modprobe --ignore-install psmouse && { \
/sbin/modprobe mousedev; \
}
alias network-card-0 via-rhine
install via-rhine /sbin/modprobe --ignore-install via-rhine
alias scsi-card-0 advansys
install advansys /sbin/modprobe --ignore-install advansys && { \
/sbin/modprobe sg; \
/sbin/modprobe sr_mod; \
/sbin/modprobe st; \
/bin/true; \
}
alias video-card-0 radeon
install radeon /sbin/modprobe --ignore-install radeon
# && { \
# /sbin/modprobe amd-k7-agp; \
# /bin/true; \
#}
alias snd-card-0 snd-via82xx
options snd-via82xx dxs_support=1
alias char-major-116 snd
alias char-major-14 soundcore
#options snd major=116 cards_limit=4 device_mode=0660 device_gid=29 device_uid=0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
alias snd-slot-0 snd-card-0
alias sound-slot-0 snd-card-0
install snd-card-0 /sbin/modprobe --ignore-install snd-via82xx
thp at varga:~$
Script done on Wed Jan 7 23:25:16 2004
tom
--
as seen in a signature:
"In an open world without walls and fences,
who needs Gates and windows?"
More information about the gull
mailing list