[gull] table: VendorID,ProductID --> driver

[cedric briner]

Bonjour,

j'ai qques problemes specifiquement avec ubuntu. Il reconnait mon disque 
comme /dev/sda alors que sous mandriva et debian ils sont nommes /dev/hda.

Sous ubuntu, j'ai souvent (1x/5min) un soft reset de sda. Ce qui cause 
un blocage net de mon OS. Tandis que tout roule sous mandriva et debian.

Comment proceder avec ubuntu pour dire qu'il l'utilise comme disque IDE 
et non comme disque SATA.

Ced.

en pieces jointes la sortie de /var/log/messages

-- 

Cedric BRINER
23 ch. Salomon-PENAY  | mel  mailto:briner at infomaniak.ch
CH-1217 Meyrin        | voip callto:41325106739 at sipcall.ch
                       |
                       | tel::maison:  +41(0)32/510-6739
                       | tel::portable +41(0)78/665-9701
                       | tel::travail  +41(0)22/379-2356
-------------- next part --------------
Oct  4 18:55:31 labete kernel: [ 1415.683281] ata1.01: qc timeout (cmd 0xa0)
Oct  4 18:55:31 labete kernel: [ 1415.683316]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
Oct  4 18:55:37 labete kernel: [ 1420.720293] ata1: port is slow to respond, please be patient (Status 0xd1)
Oct  4 18:55:42 labete kernel: [ 1425.701473] ata1: device not ready (errno=-16), forcing hardreset
Oct  4 18:55:42 labete kernel: [ 1425.701481] ata1: soft resetting port
Oct  4 18:55:42 labete kernel: [ 1426.062532] ata1.00: configured for UDMA/33
Oct  4 18:55:42 labete kernel: [ 1426.249490] ata1.01: configured for UDMA/33
Oct  4 18:55:42 labete kernel: [ 1426.249504] ata1: EH complete
Oct  4 18:55:42 labete kernel: [ 1426.258194] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Oct  4 18:55:42 labete kernel: [ 1426.266179] sd 0:0:0:0: [sda] Write Protect is off
Oct  4 18:55:42 labete kernel: [ 1426.268360] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct  4 18:55:42 labete kernel: [ 1426.277961] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Oct  4 18:55:42 labete kernel: [ 1426.278377] sd 0:0:0:0: [sda] Write Protect is off
Oct  4 18:55:42 labete kernel: [ 1426.287005] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Oct  4 18:59:52 labete kernel: [ 1676.155963] ata1.01: qc timeout (cmd 0xa0)
Oct  4 18:59:52 labete kernel: [ 1676.155998]          res 51/20:03:00:00:00/00:00:00:00:00/b0 Emask 0x5 (timeout)
Oct  4 18:59:57 labete kernel: [ 1681.192971] ata1: port is slow to respond, please be patient (Status 0xd0)
Oct  4 19:00:02 labete kernel: [ 1686.174156] ata1: device not ready (errno=-16), forcing hardreset
Oct  4 19:00:02 labete kernel: [ 1686.174164] ata1: soft resetting port
Oct  4 19:00:02 labete kernel: [ 1686.534907] ata1.00: configured for UDMA/33
Oct  4 19:00:03 labete kernel: [ 1686.722190] ata1.01: configured for UDMA/33
Oct  4 19:00:03 labete kernel: [ 1686.722205] ata1: EH complete
Oct  4 19:00:03 labete kernel: [ 1686.723169] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Oct  4 19:00:03 labete kernel: [ 1686.730868] sd 0:0:0:0: [sda] Write Protect is off
Oct  4 19:00:03 labete kernel: [ 1686.732842] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct  4 19:00:03 labete kernel: [ 1686.734714] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
Oct  4 19:00:03 labete kernel: [ 1686.742957] sd 0:0:0:0: [sda] Write Protect is off
Oct  4 19:00:03 labete kernel: [ 1686.750644] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA