[gull] Radeon 9200SE

Olivier Bornet Olivier.Bornet at puck.ch
Fri Aug 27 09:34:02 CEST 2004


Hello,

> Moi qui ne jure que par Nvidia, me voila scotche avec une superbe ATI Radeon 
> 9200 SE... J'ai tout essaye... le driver "fglrx" ave "dri" et plein d'options 
> htper exotiques (y compris compile le source), ainsi que le driver 
> "radeon"... impossible de faire fonctionner le 3D. Tout le reste fonctionne 
> (2D) tres bien.

J'utilise actuellement aussi une 9200 SE au boulot (kernel 2.4.26), et
une 9500 Pro à la maison (kernel 2.6.8 Debian compilé depuis les
sources). J'ai installé les drivers de ATI directement (fglrx). J'ai
fais ces installations sous Debian, en suivant la page:

  http://xoomer.virgilio.it/flavio.stanchina/debian/fglrx-installer.html

La démarche proposée permet de générer des packages Debian qui sont pas
trop mal. Peut-être que ça peut t'aider pour ta SuSe.

A noter que j'avais déjà essayer d'installer depuis les packages ATI
directement auparavant sans trop de problème (en utilisant alien pour
convertir en package Debian). Le seul point à faire attention, c'est de
compiler le module fglrx. Si je me rappelle bien, il faut installer les
packages ATI, et ensuite compiler le module kernel dans
/lib/modules/fglrx/, et ensuite le charger.

En attachement, ma config XFree (en partie épurée). Elle a plus ou moins
été générée avec l'utilitaire d'ATI fglrxconfig. (avec ma config,
j'utilise l'agp du kernel, et pas celui du driver fglrx. Donc, ne pas
oublier de charger le module agpgart).

HTH.

		Olivier
		
PS. Je sais, je sais, c'est pas de l'OpenSource... :-(
-- 
Olivier Bornet                |    français : http://puck.ch/f
Swiss Ice Hockey Results      |    english  : http://puck.ch/e
http://puck.ch/               |    deutsch  : http://puck.ch/g
Olivier.Bornet at puck.ch        |    italiano : http://puck.ch/i
Get my PGP-key at http://puck.ch/pgp or at http://pgp.mit.edu/
-------------- next part --------------
Section "dri"
    Mode 0666
EndSection

Section "Module"
    Load        "dbe"  	# Double buffer extension
    SubSection  "extmod"
      Option    "omit xfree86-dga"   # don't initialise the DGA extension
    EndSubSection
    Load        "type1"
    Load        "freetype"
    Load        "glx"   # libglx.a
    Load        "dri"   # libdri.a
EndSection

Section "Files"
    RgbPath	"/usr/X11R6/lib/X11/rgb"
    FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
    FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"
    FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
    FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
    FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"
EndSection

Section "ServerFlags"
EndSection

Section "InputDevice"
    Identifier	"Keyboard1"
    Driver	"Keyboard"
    Option "AutoRepeat" "500 30"
    Option "XkbRules"	"xfree86"
    Option "XkbModel"	"pc105"
    Option "XkbLayout"	"en_US"
EndSection

Section "InputDevice"
    Identifier	"Mouse1"
    Driver "mouse"
    Option "Protocol"   "ImPS/2"
    Option "Device"     "/dev/psaux"
    Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
    Identifier  "Monitor0"
    HorizSync   31.5 - 80.5
    VertRefresh 60 - 75
    Option "DPMS"
EndSection

# === ATI device section ===

Section "Device"
    Identifier                          "ATI Graphics Adapter"
    Driver                              "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor  ===
    #Option                              "NoDDC"
# === disable/enable XAA/DRI ===
    Option "no_accel"                   "no"
    Option "no_dri"                     "no"
# === misc DRI settings ===
    Option "mtrr"                       "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
    Option "DesktopSetup"               "0x00000000" 
    Option "MonitorLayout"              "AUTO, AUTO"
    Option "IgnoreEDID"                 "off"
    Option "HSync2"                     "unspecified" 
    Option "VRefresh2"                  "unspecified" 
    Option "ScreenOverlap"              "0" 
# === TV-out Management ===
    Option "NoTV"                       "yes"     
    Option "TVStandard"                 "NTSC-M"     
    Option "TVHSizeAdj"                 "0"     
    Option "TVVSizeAdj"                 "0"     
    Option "TVHPosAdj"                  "0"     
    Option "TVVPosAdj"                  "0"     
    Option "TVHStartAdj"                "0"     
    Option "TVColorAdj"                 "0"     
    Option "GammaCorrectionI"           "0x00000000"
    Option "GammaCorrectionII"          "0x00000000"
# === OpenGL specific profiles/settings ===
    Option "Capabilities"               "0x00000000"
# === Video Overlay for the Xv extension ===
    Option "VideoOverlay"               "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
#       will be disabled automatically
    Option "OpenGLOverlay"              "off"
# === Center Mode (Laptops only) ===
    Option "CenterMode"                 "off"
# === Pseudo Color Visuals (8-bit visuals) ===
    Option "PseudoColorVisuals"         "off"
# === QBS Management ===
    Option "Stereo"                     "off"
    Option "StereoSyncEnable"           "1"
# === FSAA Management ===
    Option "FSAAEnable"                 "no"
    Option "FSAAScale"                  "1"
    Option "FSAADisableGamma"           "no"
    Option "FSAACustomizeMSPos"         "no"
    Option "FSAAMSPosX0"                "0.000000"
    Option "FSAAMSPosY0"                "0.000000"
    Option "FSAAMSPosX1"                "0.000000"
    Option "FSAAMSPosY1"                "0.000000"
    Option "FSAAMSPosX2"                "0.000000"
    Option "FSAAMSPosY2"                "0.000000"
    Option "FSAAMSPosX3"                "0.000000"
    Option "FSAAMSPosY3"                "0.000000"
    Option "FSAAMSPosX4"                "0.000000"
    Option "FSAAMSPosY4"                "0.000000"
    Option "FSAAMSPosX5"                "0.000000"
    Option "FSAAMSPosY5"                "0.000000"
# === Misc Options ===
    Option "UseFastTLS"                 "0"
    Option "BlockSignalsOnLock"         "on"
    Option "UseInternalAGPGART"         "no"
    Option "ForceGenericCPU"            "no"
    BusID "PCI:1:0:0"    # vendor=1002, device=5964
    Screen 0
EndSection

Section "Screen"
    Identifier  "Screen0"
    Device      "ATI Graphics Adapter"
    Monitor     "Monitor0"
    DefaultDepth 24
    Subsection "Display"
        Depth       24
        Modes       "1280x1024"
        ViewPort    0 0  # initial origin if mode is smaller than desktop
    EndSubsection
EndSection

Section "ServerLayout"
    Identifier  "Server Layout"
    Screen "Screen0"
    InputDevice "Mouse1" "CorePointer"
    InputDevice "Keyboard1" "CoreKeyboard"
EndSection

-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: Digital signature
URL: <http://forum.linux-gull.ch/pipermail/gull/attachments/20040827/8e2f52ae/attachment.pgp>


More information about the gull mailing list