[gull] Eteindre un HD

[Magnus Anderssen]

Mitch wrote:

>En fait j'ai trouvé la solution... 
>
>#hdparm -y /dev/hdx
>  
>
j'utilise, pour éteindre un disque après X secondes, l'option -s de hdparm:

tiré du man:
 A value of zero means "timeouts  are  disabled":  the device  will not 
automatically enter standby mode.  Values from 1 to 240 specify 
multiples of 5 seconds, yielding timeouts from 5 seconds to 20 
minutes.   Values  from  241  to  251 specify  from 1 to 11 units of 30 
minutes, yielding timeouts from 30 minutes to 5.5 hours. A value of 252 
signifies a timeout of 21 minutes. A value of  253  sets  a  
vendor-defined timeout  period between 8 and 12 hours, and the value 254 
is reserved.  255 is interpreted as 21 minutes plus 15 seconds.  Note 
that some older drives may have very different interpretations of these 
values.

Salutations

Magnus

(couic)